Summary of Contents for ICON Health & Fitness PRO-FORM Le Tour de France CSC
Page 1
Model No. PFEX67720-INT.0 Serial No. USER’S MANUAL Write the serial number in the space above for reference. Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: iconsupport.eu E-mail: csuk@iconeurope.com Write: ICON Health & Fitness, Ltd. Unit 4, Westgate Court Silkwood Park OSSETT...
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
BEFORE YOU BEGIN Thank you for choosing the new PROFORM ® reading this manual, please see the front cover of this LE TOUR DE FRANCE CSC exercise bike. Cycling manual. To help us assist you, note the product model is an effective exercise for increasing cardiovascular number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly.
ASSEMBLY • Assembly requires two persons. one Phillips screwdriver • Place all parts in a cleared area and remove the one adjustable wrench packing materials. Do not dispose of the packing materials until you fi nish all assembly steps. one rubber mallet •...
Page 7
2. If there are shipping tubes (not shown) attached to the front and rear of the Frame (1), remove and discard the shipping tubes and the hardware attaching them. Orient the Front Stabilizer (2) as shown, and attach it to the Frame (1) with two M10 x 25mm Screws (69).
Page 8
4. Tip: See the inset drawing to learn how to operate the Adjustment Handle (14). Loosen handle Locate the Adjustment Handle (14) on the rear of the Frame (1). Pull the Adjustment Handle Pull handle outward, and insert the Saddle Post (7) into the Frame.
Page 9
6. Note: You can attach your own pedals if desired. Identify the Right Pedal (16). Using your fingers, turn the Right Pedal about halfway into the Right Crank Arm (18). Then, use an adjustable wrench to fully tighten the Right Pedal. Repeat this step with the Left Pedal (17).
Page 10
8. See the inset drawing. Connect the connector on the Handlebar Wire (90) to the connector on the Frame Wire (82). Tip: The wire connectors should slide together easily and snap into place with an audible click. If they do not, turn one connector and try again.
Page 11
10. While a second person holds the Console Mount (5) near the Handlebar (4), connect the Mount Wire (91) in the Console Mount to the Handlebar Wire (90) in the Handlebar. Tip: The wire connectors should slide together eas- ily and snap into place with an audible click. Avoid pinching If they do not, turn one connector and try the wires...
Page 12
12. Connect the connectors on the Console Wire (I) to the connectors on the Mount Wire (91). Tip: The wire connectors should slide together easily and snap into place with an audible click. If they do not, turn one connector and try again.
Page 13
14. Plug the Power Adapter (86) into the receptacle in the Frame (1). Note: To plug the Power Adapter (86) into an outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 14. To register your product and activate your warranty today, go to my.proform.com.
HOW TO USE THE EXERCISE BIKE HOW TO PLUG IN THE POWER ADAPTER To adjust the saddle, loosen the nuts (C) IMPORTANT: If the exercise bike has been exposed on the saddle clamp to cold temperatures, allow it to warm to room tem- a few turns, and then perature before you plug in the power adapter (A).
Page 15
HOW TO ADJUST THE SADDLE POST HOW TO ADJUST THE HANDLEBAR For effective exercise, the saddle should be at the To adjust the proper height. As you pedal, there should be a slight height of the bend in your knees when the pedals are in the lowest handlebar, first position.
Page 16
HOW TO USE THE PEDALS HOW TO USE THE BRAKE KNOB To use the pedals To change the resis- (G), insert your shoes tance of the pedals, into the toe cages press the buttons on and pull the ends of the console (see step the toe straps.
HOW TO USE THE CONSOLE CONSOLE DIAGRAM FEATURES OF THE CONSOLE When you use the manual mode of the console, you can change the resistance of the pedals with the touch The advanced console offers an array of features of a button. designed to make your workouts more effective and enjoyable.
Page 18
HOW TO ACTIVATE THE CONSOLE HOW TO USE THE TOUCH SCREEN The included power adapter must be used to operate The console features a tablet with a full-color touch the exercise bike. See HOW TO PLUG IN THE screen. The following information will help you use the POWER ADAPTER on page 14.
Page 19
HOW TO SET UP THE CONSOLE 4. Tour the console. Before you use the exercise bike for the first time, set The first time you use the console, a tour presen- up the console. tation will guide you through the features of the console.
Page 20
HOW TO USE THE MANUAL MODE Touch the various workout information displays to view more options. Touch the more button 1. Touch the screen or press any button on the (+ symbol) to view statistics or charts. Touch the console to turn on the console. center of the screen to view even more display mode options.
Page 21
HOW TO USE A FEATURED WORKOUT When you select a workout, the screen will show an overview of the workout that includes details 1. Touch the screen or press any button on the such as the duration and distance of the workout console to turn on the console.
Page 22
Note: The calorie goal shown in the workout schedule (see HOW TO USE AN IFIT WORKOUT description is an estimate of the number of on page 24) or adding the workout to your favor- calories that you will burn during the workout. ites list.
Page 23
HOW TO CREATE A DRAW-YOUR-OWN-MAP If you make a mistake, touch Undo in the map WORKOUT options. 1. Touch the screen or press any button on the The screen will display the elevation and distance console to turn on the console. statistics for your workout.
Page 24
HOW TO USE AN IFIT WORKOUT 4. Select an iFit workout from the home screen or the workout library. To use an iFit workout, you must be logged into your iFit account (see step 3 below) and the console Touch the buttons at the bottom of the screen to must be connected to a wireless network (see HOW select either the home screen (Home button) or the TO CONNECT TO A WIRELESS NETWORK on...
Page 25
6. Create a list of favorite iFit workouts if desired. 8. Follow your progress. To mark an iFit workout as a favorite, simply view See step 4 on page 20. the overview or workout summary of the desired iFit workout and touch the favorites button (heart 9.
Page 26
HOW TO CHANGE CONSOLE SETTINGS 3. Customize the unit of measurement and other settings. IMPORTANT: Some of the settings and features described may not be enabled. Occasionally, a To customize the unit of measurement, the time firmware update may cause your console to function zone, or other settings, touch Equipment Info or slightly differently.
Page 27
HOW TO CONNECT TO A WIRELESS NETWORK Note: You must have your own wireless network and an 802.11b/g/n router with SSID broadcast To use iFit workouts and to use several other features enabled (hidden networks are not supported). of the console, the console must be connected to a wireless network.
Page 28
HOW TO USE THE SOUND SYSTEM Connect Your Headphones If the console has a headphones jack, you can plug Connect with an Audio Cable your headphones into the headphones jack to listen to If the console has an audio jack, you can connect your audio from the console through your headphones.
MAINTENANCE AND TROUBLESHOOTING HOW TO MAINTAIN THE EXERCISE BIKE operation is complete, the console will turn off and then turn back on. If it does not, unplug and then plug in the Regular maintenance is important for optimal power adapter. Once the console turns on, check for performance and to reduce wear.
Page 30
HOW TO ADJUST THE DRIVE BELT Then, tighten the M10 x 60mm Screw (65) until the Drive Belt (not shown) is tight. If the pedals slip while you are pedaling, even when the resistance is adjusted to the highest level, the drive When the Drive Belt (not shown) is tight, reattach the belt may need to be adjusted.
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
PART LIST Model No. PFEX67720-INT.0 R0321A Key No. Qty. Description Key No. Qty. Description Frame Drive Belt Front Stabilizer Flywheel Rear Stabilizer Flywheel Axle Handlebar/Upper Wire Flywheel Bearing Console Mount Flywheel Spacer Console Wheel Saddle Post Foot Saddle Leveling Foot Saddle Arm Stabilizer Cap Saddle Carriage...
Page 33
Key No. Qty. Description Key No. Qty. Description Mount Wire Hairpin Cotter Pin M8 Washer Brake Washer M8 x 80mm Bolt – Assembly Tool Brake Shaft End – User’s Manual Note: Specifi cations are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the PRO-FORM Le Tour de France CSC and is the answer not in the manual?
Questions and answers