Table of Contents
Advertisement
Sii((s
1. Turn the DVD camcorder
on and set the
RECORDING
MODE
switch
to [_.
2. Tip:m°nit°r
Make sure that [_
appears
°n
theii;,_screen,
st,/lrecording mode
• Whenswitchedto still recording,the imagein the
viewf/nder o r on the LCDscreenwill be rougherthan
duringmovierecording,but this will not affectthe
recordedimage.
Number of recordab/e stills
3. Check the subject on the screen (viewfinder
or LCD), and operate
the Zoom lever as needed to adjust the size of subject image.
The zoom operation is the same as when recording a movie, See "Zooming" on
page 67. You can also switch off digital zoom (see p. 68),
4. Press the PHOTO
button
(shutter)
half way:
The operating
sound
will be heard
twice.
The DVD camcorder automatically focuses on the
subject at the center of screen (when auto focus is
selected).
5. Press the PHOTO
button
all the way in.
,
The screen will dim once( _
will blink), and_
then the recorded still will be displayed.
6. When
message
"DISC ACCESS"
disap-
pears,
recording
of still will be complete.
It will take approximately 10 seconds to store the data of one recorded still, after
which another still is recordable.
( 82
Advertisement
Table of Contents
