Table of Contents
Advertisement
2. Slide the Zoom lever to "T" control side
to zoom in on subject.
Caution:
" Be sure tozoom uptoyoursubject only when manually
focusing
onit. Ifyoubring thesubject into focus at the
wide-angle
position,
focus willbeincorrect
when y ou
zoom up tothesubject.
3. While monitoring the subject image on
the screen, turn the Select dial to adjust
the focus.
4. Once the subject
has been focused,
press
the Select
dial.
The adjusted
focus will lock, "FOCUS" will
change from characters in white background
to white characters.
To restore auto-focus
from locked manual fo-
cus, press the FOCUS button twice,
5. Zoom the subject image down to the desired size, and then start
recording.
Tips
• Manual focusisreleased w hen theDVD camcorder is turned off. When y outurntheDVD
camcorder onnexttime, a utofocuswiflberestore_
• Toreturn toauto-focus frommanual focus notyetlocked, press theFOCUS b utton.
Macro
Recording
,,o,o,ooo,ooo,ooooooooo,,o,o
Use the macro function when recording a small object from close-up position: You
can shoot the subject as close as approximately
3/8" (1 cm) from the lens surface,
magnifying the image to fill the screen,
1. Point the DVD camcorder
at the subject, and slide the Zoom lever
to "W" control side in the recording
pause status.
7.5 )
Advertisement
Table of Contents
