Hitachi DZ-MV100A Instruction Manual page 43

Hide thumbs Also See for DZ-MV100A:
Table of Contents

Advertisement

1. Turn the DVD camcorder off.
2. Fully pull out the viewfinder
and raise it.
3. While holding the Battery eject button
above the battery attachment
platform,
slide the battery upward to remove it.
Battery
remaining
level indicator:
o o _ _ o o o o o o _ o o
When the battery is used to power the DVD camcorder, the battery remaining level ap-
pears in the viewfinder or on the LCD screen, and in the information LCD as follows:
Fuliy charged
• Needy empty
White portion shows
remaining level.
(Blinks)
The battery remaining level display in the information LCD is different from the above
(see p, 63),
Tips for Skillful Use of Battery
÷ ÷_ ÷ ÷ _ ÷ ÷ _ _ ÷ _ _ ÷ _ _
Be sure to use the specified battery (DZ-BP16 or DZ-BP28):
Using other batteries could cause faulty DVD camcorder operation, or possibly a fire,
Charge the battery immediately before using the DVD camcorder:
If a charged battery is stored, it will discharge on its own; therefore, it is recom-
mended that you charge the battery shortly before using the DVD camcorder, such as
on the day before you plan to use it. You do not need to completely discharge the
battery before charging it.
43 )

Advertisement

Table of Contents
loading

Table of Contents