Samsung SC-D371 Owner's Instruction Book page 64

i ENGLmSH i
Playback
+ The Playback function and speaker works only in <Player> mode. _page 19
+ You can monitor the playback picture on the LCD Screen.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE]. (SC-D375(H)/D975 only)
3. Insert the tape you wish to view. _page 32
4. Open the LCD Screen.
[] Adjust the angle of the LCD Screen and set the brightness or color if necessary.
5. Press the [_ (REW)] button to rewind the tape to the starting point.
[] To stop rewinding, press the [B (STOP)] button.
[] The Camcorder stops automatically after rewinding is completed.
6. Press the [!_fl (PLAY/STILL)] button to start playback.
[] You can view the picture you recorded on the LCD Screen.
[] To stop the play operation, press the [B (STOP)] button.
Adjusting the LCD Bright/LCD Color during Playback
÷ You can adjust the LCD Bright/LCD Color during playback.
+ The adjustment method is the same procedure as used in <Camera> mode. _page 29
Adjusting the Volume
÷ When you use the LCD Screen for playback, you can hear recorded sound from the built-
in Speaker. :i _ _. [] o:46:oo:11 []
- Take the following steps to lower the volume or mute the sound while playing a tape on 0omin
the Camcorder.
[o5]
+ When sound is heard once the tape is in play, use the [A / T] button to adjust the
volume.
[] A volume level display will appear on the LCD Screen. ®;_'
[] Levels may be adjusted from anywhere between <00> to <19>. ,........................................................................
[] If you close the LCD Screen while playing, you will not hear sound from the speaker.
+ When the Audio/Video cable is connected to the Camcordel you cannot hear sound from
the Built-In Speaker and cannot adjust the volume.
/- \