Samsung SC-D371 Owner's Instruction Book page 20

I ENGLmSH I
Preparation
+ Use SB-LSM80 or SB-LSM160 Battery Pack only.
+ The Battery Pack may be charged a little at the time of purchase.
Char igjn_q the Lithium Ion Battery Pack
1. Turn the [Power] switch to [OFF].
2. Attach the Battery Pack to the Camcorder.
3. Connect the AC Power adapter (AA-E9 TYPE) to a wall
socket.
4. Connect the DC cable to the DC jack on the
Camcorder.
[] The charging indicator will start to blink, showing that
the Battery is charging.
Blinking time Charging rate
Once per second Less than 50%
Twice per second 50% _ 75%
Three times per second 75% _ 90%
Blinking stops and stays on 90% _ 100%
On for a second and Error - Reset the Batlery Pack and
off for a second the DC Cable
5. Press and hold the DISPLAY button while charging and the charging status will be displayed f
on the LCD screen for 7 seconds.
[] The battery charge status is given as reference and is an estimation. It may differ
depending on the Battery capacity and temperature.
6. When the Battery is fully charged, disconnect the Battery Pack and the AC Power Adapter
from the Camcorder.
Even with the Power switched Off, the Battery Pack will still discharge.
Charging, Recording Times baaed on Model and Battery Type.
÷ The continuous recording times given in the table to the right are
approximations.
Actual recording time depends on usage.
,_,The continuous recording times in the operating instructions are
measured using a fully charged Battery Pack at 77 °F (25 °C).
+ Even when the Power switched Off, the Battery Pack will still
discharge if it is left attached to the device.
Time Chargingtime Recording t ime
SB-LSM80 Approx. Approx.
(AD43-00172A) lhr 20min lhr 20min
SB-LSM100
(AD43-00148A) Approx. Approx.
(Option) 3hr 2hr 40min