Obligations Of The Operator 5.5; Qualification Of Staff; General Safety Instructions; Specific Safety Instructions When Operating Electrical Appliances - Wacker Neuson AR54 Operator's Manual

External vibrator

Hide thumbs Also See for AR54:

Operator's manual (62 pages)

Table Of Contents

Table of Contents

5.5

Obligations of the operator

5.6

Qualification of staff

5.7

General safety instructions

5.8

Specific safety instructions when operating electrical appliances

[en-US] | 02/2022 | 5100063562 | AR54-64 | Operator's Manual

• Know and implement applicable health and safety regulations.

• In a risk assessment, identify hazards arising from working conditions

at the place of use.

• Create operating instructions for the operation of this machine.

• Regularly check whether the operating instructions correspond to the

current status of the regulations.

• Clearly regulate and define responsibilities for installation, operation,

troubleshooting, maintenance and cleaning.

• Train personnel at regular intervals and inform them about possible

dangers.

• Refresh instruction at regular intervals.

• Keep records of the training received and make them available to the

competent authority on request.

• Provide personnel with the necessary protective equipment.

This machine may only be put into operation and operated by trained per-

sonnel.

In the event of misuse, abuse or operation by untrained personnel, there

is a danger to the health of the operators and/or third parties, as well as

damage or total failure of the machine.

In addition, the following requirements apply to the operator:

• Physical and mental suitability.

• Minimum age 18 years.

• No influence on reactivity by drugs, alcohol or medication.

• Familiarity with the safety instructions in this operator's manual.

• Familiarity with the intended use of this machine.

• Instructed in the independent operation of the machine.

The safety instructions in this chapter contain the "General safety instruc-

tions", which must be listed in the operator's manual in accordance with

the applicable standards. It may contain instructions which are not rele-

vant for this machine.

Protect from moisture

• When working outdoors, only use cables that are suitable for outdoor

use.

• Use a fault current protective switch if it is not possible to avoid work-

ing in a damp environment.