NINCOAIR Alumax G 535 User Handbook Manual page 6

Radio control 27/40 mhz
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
TRANSMITTER
On / Off indicator LED
Dual rate
Up / down
(Throttle)
Throttle trim
Switch Off/On
INSTALLATION AND BATTERY CHARGE
Transmitter:
Switch in position OFF
1. Open the battery cover.
2. Fit the batteries (respect polarity).
3. Close battery cover.
Helicopter:
Switch in position OFF.
When the process finishes the LED will blink. (Charging time approx. 180 min).
1)
HELICOPTER FLIGHT
1. With the helicopter switched off, first switch on the transmitter.
2. Switch on the helicopter.
3. Place the helicopter in the floor.
4. Ready to fly.
Trim adjustments:
1. Push again the left stick SLOWLY to start the flight (approx. between 0,5m and 1m).
2. If the tail turns left or right, please trim it using the trim button on the transmitter. Turn it clockwise o vice versa until the helicopter stops turning.
NINCOAIR is brand of NINCO DESARROLLOS S.L.
Ctra. de l'Hospitalet 32
08940 Cornella Barcelona Spain
CIF B-60307725 · www.nincoair.com
6
Throttle indicator
Turn adjustment
Forward Trim
Steering Trim
2)
Turn right / left
Forward / backward

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nh90023

Table of Contents