Advertisement
PB SPEED switch
Toggles the unit between regular playback
speed and the speed shown by the TIME MODE
indicator.
TIMER REC (recording) switch
INT:
to start or stop recording at the time
preset with this unit
EXT: to start or stop recording at the time
preset with the connected timer
OFF: when the timer function is not in use
TIME MODE button
Selects the recording time mode (interval
setting).
Each push cycles the setting through 12 H,
24 H, 48 H, 96 H, 192 H, 760 H.
SET, ADJUST buttons
Serve to set the date and time.
Time date generator selector:
T.D. (time/date) SET: to set the time and date
T.D. (time/date) POSITION: to change the
position of the time and date
TIMER SET: to set the built-in timer
REPEAT REC (recording) switch
Set to ON to use the same cassette for
repeated recording. At the tape end, the
cassette is automatically rewound and
recording restart from the beginning.
Only if the alarm sensor was activated,
the tape stops at the tape end.
REC (recording) LOCK switch
When set to ON, all front-panel buttons
are inoperative after recording is started.
This serves to prevent operation errors.
(aon)
|
PRL ISFIeye°
Advertisement
