Advertisement
16
"© Operation
| 1 Turn on the camera and monitor
Turn on the EVT-820.
Confirm that the picture from the camera is shown on the monitor.
3 i wishing to record the date and time, set the time date generator selector to T.D.
3 position and press the SET button to decide the position of the date and time.
Confirm that the correct date and time are displayed.
~——
j
4
|
i
As Select the recording time with the TIME MODE button.
5 Insert the cassette.
:
*
=
b 6
i
While pressing the @ button, press the » button.
Recording will start.
To stop recording
When the tape end is reached
Press the @/@ button.
The TAPE END indicator on the display panel lights up
and the tape stops. Power to the unit is not switched
If recording does not start and the cassette holder
off automatically.
opens
The record prevention tab is set to prevent recording.
When the unit cannot be switched to the black-and-
Change the tab setting (see page 14).
white mode correctly according to the signal from
the black-and-white video camera
Set the video mode switch to B & W.
Advertisement
