Multi-Function Reset/Factory Defaults Button - NETGEAR MS324TXUP Hardware Installation Manual

24-port multigig ethernet ultra60 poe++ smart switch with 4 sfp+ ports and optional remote/cloud management

Hide thumbs

Table Of Contents

Table of Contents

24-Port Multigig Ethernet Ultra60 PoE++ Smart Switch with 4 SFP Ports Hardware Installation

Supplied power is prioritized according to the port order, up to the total power budget

of the switch. Port 1 receives the highest PoE priority, while port 24 receives the lowest

PoE priority.

If the power requirements for attached powered devices (PDs) exceed the total power

budget of the switch, the PoE power to the device on the highest-numbered active PoE

port is disabled to make sure that the devices connected to the higher-priority,

lower-numbered PoE ports are supported first.

Although a device might be listed as an 802.3bt PoE++-powered or 802.3at

PoE+-powered device, it might not require the maximum power limit that is specified

by its IEEE standard. Many devices require less power, allowing all 24 PoE ports to be

active simultaneously when the devices correctly report their PoE class to the switch.

Table 3. PoE classes and PoE power allocations

Device

Compatible PoE

Class

Standard

PoE, PoE+, and PoE++

PoE+ and PoE++

PoE++

The previous table shows the standard power ranges, calculated with the maximum

cable length of 328 feet (100 meters). If a powered device (PD) receives insufficient PoE

power from the switch, consider using a shorter cable.

For more information about PoE, see the user manual, which you can download by

visiting netgear.com/support/download.