Transceiver Modules And Cables For Sfp+ Fiber Ports; Poe Port Capacities And Budget For Model Ms324Txup - NETGEAR MS324TXUP Hardware Installation Manual

24-Port Multigig Ethernet Ultra60 PoE++ Smart Switch with 4 SFP Ports Hardware Installation
For model MS324TXUP, all copper ports (1 through 24) also support PoE++ (up to 60W
per port).

Transceiver modules and cables for SFP+ fiber ports

To enable fiber connections on the switch, SFP+ fiber ports accommodate standard
small form-factor pluggable (SFP) gigabit interface converters (GBICs, also referred to
as transceiver modules) and direct attach cables (DACs) for fiber connectivity. GBICs
and DACs are sold separately from the switch.
The switch supports the following NETGEAR SFP and SFP+ transceiver modules and
cables:
• Short-reach fiber transceiver modules:
- AGM731F: SFP transceiver 1000BASE-SX, SFP multimode LC GBIC
• Long-reach fiber transceiver modules:
- AGM732F: SFP transceiver 1000BASE-LX, SFP single mode LC GBIC
- AXM761: SFP+ transceiver 10GBASE-SR, SFP+ multimode LC GBIC
- AXM762: SFP+ transceiver 10GBASE-LR, SFP+ single mode LC GBIC
- AXM763: SFP+ transceiver 10GBASE-LRM, SFP+ long range, multimode GBIC
- AXM764: SFP+ transceiver 10GBASE-LR Lite, SFP+ single mode LC GBIC
• Gigabit transceiver modules:
- AGM734: SFP transceiver 1000BASE-T, SFP copper RJ-45 GBIC
- AXM765v2: SFP+ RJ-45 transceiver 10GBASE-T (80m, CAT6A) GBIC
• Direct attach cables:
- AXC761: SFP+ 1 m (about 3.3 ft) direct attach cable
- AXC763: SFP+ 3 m (about 10 ft) direct attach cable
For more information about NETGEAR SFP and SFP+ transceiver modules and cables,
visit netgear.com/business/products/switches/modules-accessories.

PoE port capacities and budget for model MS324TXUP

Model MS324TXUP supports eight Ultra60 PoE++ ports with the port capacities
described in the following table. The maximum PoE power budget for the switch is
720W across all active PoE++ ports.
Hardware Overview
Guide
15 Hardware Installation Guide