Return The Router To Its Factory Default Settings; Use The Reset Button - NETGEAR RAX15 User Manual

4. Select ADVANCED > Administration > NTP Settings.
The NTP Settings page displays.
5. Select an NTP server radio button:
• Use the default NETGEAR NTP server: Use the preset NETGEAR NTP server.
• Set your preferred NTP server: Use your preferred server.
6. If you selected the Set your preferred NTP server radio button, enter the NTP server
domain name or IP address in the Server Address field.
7. Click the Apply button.
Your settings are saved.
Return the router to its factory default
settings
Under some circumstances (for example, if you lost track of the changes that you made
to the router settings or you move the router to a different network), you might want to
erase the configuration and reset the router to factory default settings.
To reset the router to factory default settings, you can use either the Reset button on
the back of the router or the Erase function.
After you reset the router to factory default settings, the user name is admin, the
password is password, the LAN IP address is 192.168.1.1 (which is the same as
www.routerlogin.net), and the DHCP server is enabled.
Note: If the router is in access point mode and you do not know the IP address that is
assigned to it, first try to use an IP scanner application to detect the IP address. (IP
scanner applications are available online free of charge.) If you can detect the IP address,
you don't need to reset the router to factory default settings.

Use the Reset button

CAUTION: This process erases all settings that you configured in the router.
To reset the router to factory default settings:
1. On the back of the router, locate the Reset button.
2. Using a straightened paper clip, press and hold the Reset button for at least five
seconds.
Manage Your Router
4-Stream AX1800 WiFi 6 Router Model RAX15
105 User Manual