Applying Power To The Base Unit; Desk Or Tabletop Installation - Uniden DX8200 Instructions Manual

Applying Power to the Base Unit

The DX8200 phone requires an AC outlet, without a switch to interrupt
power, and the included AC adapter. To relieve strain on the DC plug when
the phone is placed on a desk or table, wrap the power cord around the
convenient notch on the bottom.
Place the power cord so that it does not create a trip hazard, or where
it could become chafed and create a fire or other electrical hazards.
Use only with the Uniden AC adapter supplied with the DX8200.
Do not alter the shape of the blades of the polarized plug.
If you cannot plug the AC Adapter into the outlet, contact someone
about replacing the outlet.

Desk or Tabletop Installation

1. Plug the AC Adapter cord into the DC
input jack on the Base Unit.
8