Table of Contents
Advertisement
My Mode(Programming)
Use this mode for personalized comfortable settings. The My Mode can be set by using the remote controller.
Up to 3 programs can be set.
How To programming the My Mode
OK
Enter to My Mode programming
Press
(My Mode) button continuously for 5 seconds to enter into My
Mode programming.
"
"blinks on the LCD. And " " , " " or " " any one appear at the right of
●
1
"
".
The blinking of "
" will remain for 10 seconds.
By pressing
(My Mode) button "
for programming.
Mode selection
Press
(Mode) button to select desired mode during "
●
2
Mode will be scrolling from
●
Fan (circulator).
Fan speed selection
Press
(Fan speed) button to select desired Fan speed during "
●
3
blinks.
Available Fan speed only can be selected as per selected desired mode.
●
Desired Room Temperature Selection
Press
Press
button or
●
4
during"
" blinks.
Temperature range can be set between 16°C and 32°C.
●
In Fan mode temperature can not be set desired Room Temperature.
●
Silent selection
Press
●
(Silent) button in order to set and cancel Silent feature
5
during "
" blinks.
- 31 -
", "
" or "
Heat
Auto
Cool
button to select desired temperature
" can be selected
" blinks.
Dry
"
Advertisement
Table of Contents
