Hitachi RC-BGH1FA0G Manual page 32

My Mode(Programming)
How To programming the My Mode
OK
If operation of remote controller will not be done for 10 seconds during My Mode programming, remote controller
●
will come out from My Mode programming without registering of My Mode Programming.
Without registering of My Mode Programming, My Mode selection will remain with all previously selections and
previous values.
● If My Mode button is kept pressing for 5 seconds during My Mode Programming, remote controller will come out
from My Mode programming.
Without registering of My Mode Programming, My Mode selection will remain with all previously selections and
previous values.
If My Mode timer has elapsed, press My Mode button again to restart the Timer operation.
●
If battery is replaced, or reset key is pressed, My Mode settings on Remote controller will be reset to default
●
settings. if new settings are required carry out My Mode programming again.
When operation mode lock is set, selectable mode during My Mode will be limited.
●
Any timer can not be set if My Mode is selected.
●
If weekly timer is already set and press My Mode button then,
●
1. If selected My Mode does not have program On/Off timer then weekly timer symbol appear on remote controller
display along with My Mode icon and weekly timer continue works.
2. If selected My Mode have program On/Off timer then weekly timer symbol disappear from remote controller
display until My Mode On/Off timer get execute/expire. Then weekly timer will continue in work and weekly timer
symbol also appear on remote controller display.
Off Timer Setting
Press ( Off Timer) Button to select OFF timer.
●
and " " or previous "set time" Symbol start blinking on LCD
6
screen.
Press button to set desire OFF timer.
●
button . It will set OFF timer programming.
Press
●
and set OFF time Symbol stop blinking on LCD screen.
To cancel OFF timer , Press
●
On Timer Setting
Press ( On Timer) Button to select ON timer.
●
and " " or previous "set time" Symbol start blinking on LCD
7
screen.
Press button to set desire ON timer.
●
Press button . It will set ON timer programming.
●
and set ON time symbol stop blinking on LCD screen.
To cancel ON timer , Press
●
Set and active My Mode
Once all desire setting complete , Press
8
during " " blinks.
It will save all setting done from step 2 to 7 and activate My Mode
with Buzzer sound from indoor unit.
- 32 -
button.
button.
(On/Off) button