Turning The Answering System On/Off - Uniden DCT648-2 Series Owner's Manual

Answering System Default Settings
Some answering system functions can be set through the base or handset.
Default settings for each function are as follows:
Functions
Answer On/Off
Time
Security Code
Ring Time
Record Time
Message Alert
Language
Call Screen

Turning the Answering System On/Off

1) To turn the answering system On, press ans on/off in
standby mode.
After the announcement "Answering System is on", the
current greeting message will be played and you will hear
a confirmation tone. The message counter displays the
number of messages stored in memory. If the display flashes,
then there are new messages waiting for you.
2) To turn the answering system Off, press ans on/off. After the announcement "Answering
System is off", the message counter display will no longer be illuminated.
w w w . u n i d e n . c o m
Reference Page
Default Setting
Base
On P. 51
SUN 12:00 AM* P. 54
80 P. 54
Toll Saver P. 55
1 minute P. 55
Off P. 56
English P. 57
On P. 57
Handset
−
P. 27
*To activate the clock and
P. 25
time stamp, you must
P. 26
setup the Time function.
P. 26
P. 26
P. 26
P. 27
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 5 1 ]