Cobalt Digital Inc 9323 Product Manual page 67

Operating Instructions
Table 3-2 932X Group Function Submenu List — continued
• Down Mix Left or Right as Source
• Mono Mix as Source
®
• Dolby Decoded Channel as Source
• Tone Generator 1 thru 4 as Source
9323G-OM (V4.6)
932X Group Function Submenu List and Descriptions
(continued)
Down Mix Left and Down Mix Right selections in Source drop-down list
allow either downmixer left or right channel to be the source for the
selected destination Embedded Audio Group channel.
(In this example, the Down Mix Left channel is the source for destination
Embedded Ch 1)
Note: Down Mix Left and Down Mix Right channels are a stereo pair
derived from the L, C, R, Ls, and Rs channel inputs selected using
the Audio Mixing function. The stereo pair consists of basic L/R
PCM signals with no additional encoded information.
Refer to Audio Mixing function description on page 3-35 for more
information.
Mono selection in Source drop-down list allows mono mix content to be
the source for the selected destination Embedded Audio Group channel.
(In this example, the mono content is the source for destination
Embedded Ch 1)
Note: Mono mix content is set up using Mono Mixer Selection in the
Audio Mixing function). Refer to Audio Mixing function
description on page 3-35 for more information.
(+DEC only) Dolby Ch 1 thru Dolby Ch 8 range in Source drop-down list
enables a Dolby
destination Embedded Audio Group channel.
(In this example, Dolby
Embedded Ch 1)
Note: Drop-down choices of Ch 1 thru Ch 8 and Mix 1/Mix 2 represent
•
•
maximum channels available. Actual active channel complement is
•
per received Dolby
channels should not be used.
Refer to Dolby Decoder function description on page 3-30 for more
information.
Refer to Dolby
for an example of using and routing Dolby
Tone Generator 1 thru Tone Generator 4 range in Source drop-down list
enables one of four tone generators (Tone 1 thru Tone 4) to be the source
for the selected destination Embedded Audio Group channel.
(In this example, Tone 1 (tone generator 1) is the source for destination
Embedded Ch 1)
Note: Tone generator frequencies can be independently set for the four
tone generator sources.
Refer to Tone Generator function description on page 3-40 for
more information.
9323 GROUP PRODUCT MANUAL
®
decoded channel to be the source for the selected
®
decoded Ch 1 is the source for destination
®
format and upstream encoding. Inactive
®
E Processing and Routing Example on page 3-43
®
decoding.
3-17