Cobalt Digital Inc 9323 Product Manual page 17

Introduction
9323G-OM (V4.6)
Loudness Processor (Option +LP)
Note: Loudness processor function is an optional licensable feature. This function
and its controls appear only when a license key is entered and activated.
(This option (identified in Cobalt
initial order, or field-activated using a key string which is sent to you when this
option is purchased.)
If your card was purchased with option
supplement "5.1 and Stereo Loudness Processing Options for Compass
Cards (+LP51, +LP20) Manual Supplement" (OPT-SW-LP-MS) is included
in your documentation package. Supplement OPT-SW-LP-MS can be
downloaded from our website or requested using the Cobalt contact
information in this manual.
Tone Generator Function
The card contains four built-in tone generators (Tone Generator 1 thru Tone
Generator 4). Each of the four tone generators can be set to a different
frequency, and are available as audio sources for the embedded or AES audio
outputs.
18 discrete sine wave frequencies are available, ranging from 50 Hz to 16 kHz
(default frequency is 1.0 kHz).
Audio Routing Example
Figure 1-8 shows an example of using the 9323 audio embedding/
de-embedding and routing functions to de-embed audio, route the audio to
discrete outputs for post-production processing (in this example, a console
used for post-production EQ, levels, and monitor), and finally re-embed the
audio into the SDI video output. Additionally, the example shows how
external analog sources can be embedded into the SDI output (in this
example, a provision for local station ID voice-over analog).
Note that the source and destination correlations shown here are only
examples; any source can route to any destination.
9323 GROUP PRODUCT MANUAL
932X Functional Description
®
price lists as +LP) can be purchased upon
, loudness processor manual
+LP
®
1-13