Regulatory And Safety Requirements - LEGRAND KEOR SPE TOWER Series Installation And User Manual

This section contains important safety and operating instructions that should always be followed
during the installation, use and maintenance of the UPS.
DANGER
The UPS operates with dangerous high voltages. Only skilled technicians qualified and authorized
by LEGRAND must perform ordinary maintenance operations. Extraordinary maintenance opera-
tions must be carried out by LEGRAND Technical Support Service personnel.
• This product should be installed in compliance with installation rules, preferably by a
qualified electrician. Incorrect installation and use can lead to risk of electric shock or
fire. Before carrying out the installation, read the instructions and take account of the
product's specific mounting location. Do not open up, dismantle, alter or modify the
device except where specifically required to do so by the instructions. All Legrand products
must be opened and repaired exclusively by personnel trained and approved by Legrand.
Any unauthorised opening or repair completely cancels all liabilities and the rights to
replacement and guarantees. Use only Legrand brand accessories.
• Ensure that the mains voltage, frequency, and output load match those of the UPS (check
the product label and the technical specifications).
• If any visible damage is found on the product during the unpacking operation, do not
install the UPS and return it to your reseller or distributor.
• Before supplying any load equipment, ensure the UPS is connected to a grounded mains
socket.
• Do not attempt to open or disassemble the UPS; there are no user replaceable parts.
Opening the case will void the warranty and introduces the risk of electric shock.
• Make sure the UPS is completely turned off when it is transported.
• The detachable power supply cable acts as a separation device. The mains socket must be
installed near the UPS and must be easily accessible.
• In case of a mains power supply failure, do not unplug the input cord. Earth continuity must
be ensured to the connected loads.
• Do not plug non-computer-related items such as medical, life-support and house electric
equipment to the UPS output.
• Do not plug laser printers to the UPS outlets due to their high start-up current.
• The UPS functions with TT and TN systems.
• In case of emergency, immediately turn off the UPS and unplug the input cord from the
mains.
• Do not allow any liquid or foreign object to enter the UPS.
• The UPS is intended for indoor installation in a ventilated, controlled indoor environment
with a range of temperature between 0°C (+32°F) and +40°C (+104°F) and non-condensing
humidity <95%.
• Do not install the UPS in locations with sparks, smoke, and hazardous gas or where there
is water and excessive humidity. Dusty, corrosive, and salty environments can damage the
UPS.
• Do not plug the UPS input into its own output.
• Do not attach a power strip or surge suppressor to the UPS to avoid potential overloads.
38

2 Regulatory and safety requirements