Scan Hold - Uniden BCT7 Operating Manual

When the BCT7 receives
communications, scanning stops, the
active bank type replaces the state
code, and the frequency displays.

Scan Hold

When scanning stops on a desired
frequency, press H to hold on that
frequency as long as you like.
Note: While in the HOLD mode, the alarm circuit is inactive.
10
Active Bank indicators:
HP - Highway Patrol
PO - Police
DT - DOT
To resume scanning, press
When the transmission ends, a
built-in two second delay feature
holds the scanner on that
frequency for a response. If there
is no response, scanning resumes.
H
. To scan the other frequency banks,
see "Scanning the Fire, News,
Weather, and Private Frequency
Banks," page 14.