Scan Hold
Warning Alert does not work in this mode.
Note:
When scanning stops on a desired
frequency, press H to hold on that
frequency as long as you like.
Frequency Lock Out
You can lock out a frequency so it is not scanned.
Lock out does not erase the frequency.
You can restore the frequency to scanning whenever you wish.
Note:
You can lock out up to 50 preprogrammed frequencies and 100 user-programmed frequencies.
In Scan Mode
When the scanner stops on a
frequency you don't want to hear,
press L.
To resume scanning, press
Scanning resumes immediately
because that frequency is no
longer in the scanning sequence.
HIGHWAY
POLICE
DOT
WX
PRIVATE
FIRE
NEWS AIR
H
If the BCT7 stops on an undesired
.
frequency, press
the unit to start scanning before the
end of that transmission..
Or, lock out that frequency (see
Frequency Lock Out)
H
twice to force
15