Table of Contents
Advertisement
How to record
@ To pause recording temporarily
teREC_PAUSE
@
The REC PAUSE
indicator
lights up.
To resume recording
@REC/ARM
@ To stop recording
2
Stop playing the source component.
@ How
to
provide
non-recorded
blanks between programs
To
make
a non-recorded
blank
of about
4
seconds:
Press the [@] key
its
'
@REC/ARM
twice in succession.
@
After leaving a non-recorded blank of about 4 seconds, the
deck enters the record-pause mode.
To make a non-recorded blank during recording:
Press the [@] key
once during recording.
@ REC/ARM
@ After running to make a non-recorded blank of about 4 se-
conds from the point where the key is pressed, the deck
enters the record-pause mode.
14 kx-ws040 (én)
REC/ARM key [@)
REC PAUSE key
Deck A
Deck B
operation
operation
keys
keys
@ To re-start recording after mistake
A non-recorded space of 4 seconds
or more should be
reserved before the position where recording was started.
1
Stop recording and rewind tape.
During recording in
the > direction:
Pe
ee
During recording in
the < direction:
Eas oe ie
®
The recording is aborted, the tape is rewound to the posi-
tion where the recording was started, and the deck enters
the stop mode after leaving a non-recorded space of about
2 seconds from the end of the previous tune.
2
Re-start recording.
®@ Anon-recorded space of 4 seconds is reserved on tape, then
the tape transport stops.
@ Press the [@] key once.
@ REC/ARM
®@ Recording starts.
Advertisement
Table of Contents
