Table of Contents
Advertisement
Listening to cassette tapes
Deck A
Deck B
EJECT key [al
EJECT key [a]
Before starting playback
Set the TIMER switch to OFF.
@ TIMER
REC OFF PLAY
DOLBY NR
switch
Deck A
Deck B
operation
IRECTION
wea
operation
favs
DIRECTION
switc!
keys
TIMER switch
@ To playback a tape
1
Insert a cassette tape.
Press the EJECT key.
Close securely
@
The type of tape, Normal, Chrome or Metal, is detected and set automatically.
by presen union saside
@
Be sure to remove tape slack before insertion.
Determine the playback conditions.
@) Select the playback mode.
@ Select the Dolby NR mode.
Select according to the tape to be played.
To play both sides endlessly.
To stop after playing both
SOlLBY KA
sides of tape.
B_OFF_C
DIRECTION
To stop after playing one
(Co)
side of tape.
3
Start playback.
®
Do not press the EJECT key |] until the tape has stopped
completely.
To stop playback, press the (@
[ Tape transport direction indicators
The <p
indicators show the direction of tape transport in its play-
back or recording. The direction selected when the tape was stopped
the last time is maintained even after the power is turned off. When
P~{
o<
|
=
| =]
the tape is started automatically by the automatic play operation, etc.,
fiz
Perea
the transport starts with the direction shown by the direction indica-
tor. If you want to change the transport direction for the next time
the poweris turned on, press the play key of the opposite direction
before turning power off.
Direction indicators
10 kx-wes040 (EA)
Advertisement
Table of Contents
