Kenwood KX-W5040 Instruction Manual page 22

Timer operations
KX-W5040
Do ee Semmema To CO
TUNER
Audio timer
Yo
(—— Js
oy (so = tone a
M@ Timer recording of tuner broadcast
1 Set the power switches of the components
used in timer recording to ON. 4 Adjust-the: recording level.
@) Set the record-pause mode.
Receive the desired radio station with the ® Adjust the recording level.
tuner.
® Adjust so that the +3 dB segments of the peak level meter lights
at times.
3 Make preparations of the cassette deck.
@ insert a tape(s) in a cassette deck.
® Insert a tape into either deck A or deck B. Set the relay recording as required.
® For relay recording, insert tapes into both decks A and B
(refer to page 15).
@ Refer to page 15.
@ Relay recording, if selected, starts with deck A and continues
on deck B.
@) Set the tape transport direction.
Set the time when the recording is to be
Two-side recording started
One-side recording
® for the time setup operation, read the instruction manual of
your timer.
@) Select the Dolby NR mode.
Set the TIMER switch to REC.
DOLBY NR ® TIMER
B OFF _C REC OFF PLAY
===
@ When the set time comes, the powers of the related compo-
nents are turned ON and recording starts.
® Recording stops when the end of tape is reached.
Note:
To ensure that the cassette deck's automatic shut off switch operates before the power is shut off, set the timer so that it operates for a little longer
than the playing time of the tape.
22 Kx-wW5040 (En)