Timer Operations - Kenwood KX-W5040 Instruction Manual

Timer operations
KX-W5040
This unit incorporates a built-in timer standby function. By
using an audio timer optionally available in the market,
wake-up playback and unattended recording of tape can
be started at any time of the day.
Amplifier
0-L=]
Oo ee Seseeas oS
Preparations for timer playback and recording
Connect the power cords of the components directly
or indirectly to the timer so that their powers can be
turned on via the timer.
The timer setup operation varies depending on the
timer. Also read carefully the instruction manual of your >
audio timer.
When operating the unit other than CD player using
an audio timer, be sure to remove the disc from the
CD player.
TUNER
o0 Ces
Audio timer
@ Timer playback
used in timer playback to ON.
The type of tape, that is, Normal, Chrome or Metal, is set
automatically.
Remove the tape slack before insertion.
Set the playback condition.
Set the TIMER switch to PLAY.
® jf relay playback is required, set to' TD" or" ="
@ Select the Dolby NR mode.
@ TIMER
DOLBY NR REC OFF PLAY
(aa)
—>
® Set according to the tape(s) to be played.
Note:
If tapes are inserted in both decks A and B, timer playback starts with deck A.