Troubleshooting - Uniden BC350A User Manual

If your BC350A is not performing properly, try the steps listed below.
PROBLEM
Scanner won't work
Improper reception.
Scan won't stop.

Troubleshooting

* Applies to mobile installation only
Check the connections at both ends of the AC
Adapter.
Turn on the wall switch of your room. You
could be using an outlet controlled by the wall
switch. Move the AC Adapter to another wall
outlet.
*
Check the connections at both ends of the DC
cord or cigarette lighter cord.
*
Check to see if the fuse is blown. If the fuse is
blown
*
Make sure the ignition key is at the Accessory
position.
*
Make sure the power switch is turned on.
Check the antenna and its connection.
When you are using a telescoping antenna
You may be in a fringe area. This may require
an optional multi-band antenna. Check with
your dealer or local electronics store.
Check and adjust
Check and adjust Squelch (see "Adjusting the
Squelch").
Check the antenna connection.
For the PRIVATE bank scan
It is possible that none of the programmed
frequencies are active at the time. Try the
band search.
22
SOLUTION