Page 1
FM36M1 First Start Main Page > EOL Products > FM36M1 > FM36M1 First Start Contents 1 How to insert SIM card and connect battery 2 2x6 socket pinout 3 PC Connection (Windows) 4 How to install USB drivers (Windows) 5 Configuration (Windows)
Page 2
Data for 1–Wire devices. INPUT 5 RX EXT (LVCAN - RX). PC Connection (Windows) Power-up FM36M1 with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED behaviour description”. Connect device to computer using Micro-USB cable: You will need to install USB drivers, see "How to install USB drivers...
Page 3
After connection to Configurator recommended configuration will be displayed: In Advanced Configuration mode FM36M1 is more configurable. FM36M1 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save button. Main buttons offer following functionality: Connect / Disconnect –...
Page 4
GND vehicle computer. Connecting the GND at an arbitrary point to the mass of the car is unacceptable, as static and dynamic potentials on the line GND will be unpredictable, which can lead to unstable FM36M1 operation and even its failure.
Page 5
The device must be firmly fastened in a predefined location. The programming must be performed using a PC with autonomic power supply. The device is susceptible to water and humidity. Installation and/or handling during a lightning storm is prohibited. https://teltonika-gps.com/product/fm36m1/...
Need help?
Do you have a question about the FM36M1 and is the answer not in the manual?
Questions and answers