Maintenance; Cleaning; Storage; Disposal / Environmental - Parkside PLMB 4 A1 Translation Of The Original Instructions

more than 5 V, the
charging current must
not be more than 1 A.
The battery status
indicator
on the display when the
battery is fully charged.
3. After charging, fi rst
disconnect the USB plug
(8) from the USB port/
power supply.
4. Then pull the USB-C plug
(9) out of the charging
socket (6).

Maintenance

The unit is maintenance-
free.

Cleaning

Switch off the device
before cleaning.
• Clean the device, using a
soft dry cloth so as not to
scratch the display (2).
• Do not use any abrasive
cleaning agents or
solvents. These could
damage the device
irreparably.
• Do not use water or
metallic aids. There is a
risk of a short circuit.

Storage

Store the device in a dry
place, out of reach of
children. The device must
remains not be exposed to direct
sunlight during storage.
Disposal /
Environmental

protection

The device and packaging
should be properly recycled.
battery in the household
waste, a fi re (risk of
explosion) or water.
Damaged batteries can
harm the environment and
your health if poisonous
fumes or liquids escape.
• Dispose of the device
with the battery
discharged. Do not open
the device or battery.
• Dispose of the device
in accordance with the
local regulations. Take
the device to a recycling
plant. The plastic and
metal parts used on your
device can be properly
sorted according to
materials and grades
and effi ciently recycled.
GB IE
Do not dispose
of devices with
a built-in
NI
11