1. Manuals
  2. Brands
  3. Hawkeye Mfg Manuals
  4. Action Cameras
  5. Firefly 8SE
  6. How to reset

Hawkeye Mfg Firefly 8SE How To Reset

Hide thumbs
1
2
3
4
5
Table of Contents

Advertisement

Quick Links

Download this manual
ZEB CAM for ZEB Revo/Revo RT - Firefly 8SE Reset

Overview

This article explains how to reset the ZEB Cam for ZEB Revo and ZEB Revo RT - Firefly model 8SE.

Warnings

Please check your camera model first to make sure you are following the correct procedure.

Procedure

If you're not sure which ZEB Cam version you have, check out this article first:
Which ZEB Cam version do I have?
1. Remove the camera retaining screw using a 4mm hex key.
https://knowledge.faro.com/Hardware/GeoSlam/ZEB_Revo_and_Revo_RT/ZEB_CAM_for_ZEB_Revo_Revo_RT-Firefly_8SE...
Updated: Wed, 11 Oct 2023 08:27:31 GMT
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Firefly 8SE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hawkeye Mfg Firefly 8SE

Summary of Contents for Hawkeye Mfg Firefly 8SE

  • Page 1 ZEB CAM for ZEB Revo/Revo RT - Firefly 8SE Reset Overview This article explains how to reset the ZEB Cam for ZEB Revo and ZEB Revo RT - Firefly model 8SE. Warnings Please check your camera model first to make sure you are following the correct procedure.
  • Page 2 2. Remove the camera from the frame. 3. Remove the SD card from the camera. 4. Power on the camera by pressing the Power/Mode button on the front of the camera. 5. Ensure the camera is set to video mode. Short press the Power/Mode button on the front of the camera to cycle between Video mode and Camera mode.
  • Page 3 7. Select the Camera settings and the swipe down to the Default Setting option. 8. Select the Default Setting option and the touch the Tick box to accept this selection. The camera will reset then briefly power off and back on. https://knowledge.faro.com/Hardware/GeoSlam/ZEB_Revo_and_Revo_RT/ZEB_CAM_for_ZEB_Revo_Revo_RT-Firefly_8SE…...
  • Page 4 9. Go back to the Camera settings page again by touching the Setting icon on the touch screen. 10. On the Video Settings sub-page make the following: Video settings Changes to default Video Resolution 1440P (1920x1440) 30 FPS Microphone Volume 11.
  • Page 5 Screen Off Time Setup Change as required Language Change as required 12. Press the Power/Mode button to exit the settings page. 13. Long press the Power/Mode button to power the camera off. 14. Install the SD card in the camera. 15.

Table of Contents