Using Vistascan To Scan A Photo To E-Mail - UMAX Technologies Astra 2000U Owner's Manual

Using VistaScan to Scan a Photo
to E-mail
Scanning an image to e-mail is almost the same procedure as
described in the Using VistaScan to Scan and Print Images section
earlier in this guide. Follow steps 1 – 3 as listed in the Scan and
Print instructions, and then proceed with the following steps:
1. Click on the E-mail icon to set the scanner settings to the best
values for scanning an image to E-mail.
NOTE: You may need to adjust the destination preferences in
the VistaScan Beginner window. For information about setting
preferences, refer to Setting the VistaScan Preferences section
earlier in this guide.
2. Click on the Web Image icon in the Click to Scan area of the
VistaScan Beginner window. The scanner starts scanning the
image using the appropriate settings for web images.
3. When the scanner has completed scanning the image, a
Microsoft Exchange or Lotus cc:Mail e-mail window appears
with an icon representing the scanned image embedded in the
message area of the window.
NOTE: For more information about using Microsoft Exchange
or Lotus cc:Mail refer to the user documentation that came with
the application.
4. Fill out the rest of the standard E-mail information (address,
subject, etc.) as you ordinarily would. Send the E-mail.
UMAX Astra 2000U/P Owner's Guide
69