Astra 2000P Backpanel; System Requirements - UMAX Technologies Astra 2000U Owner's Manual

Parallel Interface
Connector "TO PC"
There are two parallel ports on the Astra 2000P scanner. This
allows your printer and your scanner to communicate with your
computer using the parallel connector. The first parallel port is used
to connect the scanner to your computer. You attach your printer
cable to the second parallel port, which acts as a pass-through port.

System Requirements

This section defines the minimum system requirements necessary to
operate either the Astra 2000U or Astra 2000P scanner. Please refer
to the section below that applies to your scanner and computer type.
Astra 2000U Scanner
PC Requirements
An IBM-compatible PC with 80486, Pentium processor or
higher
®
Microsoft
USB interface connector
At least 16 MB RAM memory (32 MB recommended)
CD-ROM drive
170 MB of available hard disk space
12
Parallel Interface
Connector "TO
Printer"

Astra 2000P Backpanel

Windows 98, 95 OSR 2, or higher
Power Adapter
Receptacle