Scanning An Image From The Macintosh - UMAX Technologies Astra 2000U Owner's Manual

4. Click the Get Photo button.
5. Click the Get Photo tab.
6. Click the Scanner button to display a menu of available input
sources. Select UMAX VistaScan, then click OK. The
VistaScan Beginner window appears.
NOTE: You only need to select the device driver once in
PhotoDeluxe. It will remember your selection the next time you
use the application.

Scanning an Image From the Macintosh

1. Select an item you would like to scan (a picture, a brochure,
etc.).
2. Lift the document cover and place the item facedown so it
aligns with the arrow ( ) at the back edge of the object glass.
3. Click the Preview button on the right side of the VistaScan
Beginner window and the scanner begins a low-resolution scan.
4. When the preview scan is complete the preview image is
displayed in the Preview window (on the left side of the
VistaScan window).
UMAX Astra 2000U/P Owner's Guide
25