Table of Contents
Advertisement
3.6
Vehicle identification data
ⓘ
You can find information on this topic in the chapter
of the same name in the Body-Equipment-Guideline
for Sprinter Vans.
3.6.1
QR code rescue sticker
QR code rescue sticker on B-pillar on driver's side (example,
schematic diagram)
All vehicles are supplied with a QR code rescue sticker
ex factory. The rescue stickers in the eSprinter model
series 907 are located at the left and right B-pillars.
Mercedes-Benz | Supplemental Guideline for eSprinter – Model Series 907, Edition 2023-8
The current rescue card or rescue data sheets for the
vehicle are displayed on the mobile terminal accord-
ing to the language settings when the QR code on the
sticker is scanned using a smartphone or tablet with
an Internet connection. If the national language is not
available, the system resorts to the English version.
This means that rescue crews can immediately see
where the airbags, battery, electric lines, pressure
cylinders, and other component parts critical for the
rescue are located. This lets them use rescue shears,
for example, with low risk.
The rescue card corresponds to the vehicle in the state
that it was in when supplied by Mercedes-Benz.
For component parts that are visible on the rescue
card (see following illustration) and where changes to
these parts – in accordance with the specifications in
the existing supplemental guideline and the supple-
mentary Body-Equipment-Guideline for the base vehicle
– are permissible, if these parts are removed, modified,
or added to in any way whatsoever, then the rescue
stickers provided ex factory are rendered unusable.
In this case, the Upfitter must produce a new rescue
card as per ISO17840-1 to 4 for the respective vehicle
that illustrates this information. The rescue cards can
be made available either online via a QR code, or can
be provided in the vehicle in printed form (preferably
behind the driver's sun visor).
3 Planning of bodies
27
Advertisement
Table of Contents
