Table of Contents
Advertisement
Maintenance
Refer to this section for information about maintaining and servicing
the High Voltage Differential Probe.
For terms of the product warranty, refer to the front of this manual.
Should the probe require replacement under terms of the warranty,
return the probe to a Tektronix service center. Refer to page 25 for
packaging instructions.
For a list of replaceable parts, refer to the Replaceable Parts section
on page 35.
For further assistance, refer to Contacting Tektronix on page viii.
Cleaning
Remove dirt with a soft cloth dampened in a mild detergent and
water solution or isopropyl alcohol.
CAUTION. To avoid damaging the probe, use only a mild detergent
and water solution or isopropyl alcohol, do not use any other
solvents or abrasive cleaners. Do not immerse the probe.
Servicing the Compensation Box
Some components of the compensation box can be serviced. These
components include the TEKPROBE interface pins, the probe collar,
and the compensation box covers.
Replacing TEKPROBE Interface Pins
TEKPROBE interface pins can stick and fail to make contact after
time. Periodically check each of the interface pins. Replace any pin
that fails to move freely and fully extend.
P5205 Instruction Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
21
Advertisement
Table of Contents
