Table of Contents
Advertisement
S
E
R
I
E
S
Product Overview
The CS10 is a sub-compact, powered, intelligent, line array enclosure designed for extended throw applications. It contains
two symmetrically arrayed 10" LF transducers, and a 4" HF compression driver mounted onto an Adamson waveguide. The
high frequency waveguide is designed to couple multiple cabinets across the entire intended frequency band without loss of
coherence.
Each CS10 cabinet houses Class-D amplification and comprehensive internal signal processing including Milan AVB connectivity.
Internal switch fabric allows multiple enclosures to be daisy-chained in order to reduce the amount of cabling needed in complex
system setups.
The operational frequency range of the CS10 is 60Hz to 18kHz. The use of proprietary technologies such as Controlled
Summation Technology and Advanced Cone Architecture allows high maximum SPL and maintains a consistent nominal
horizontal dispersion pattern of 110° down to 400Hz.
The enclosure is made of marine grade birch plywood with an integrated aluminum and steel four-point rigging system. Without
sacrificing low resonance to composite material, the CS10 only weights 31 kg / 68.4 lbs
Up to twenty CS10 can be flown in the same array when using the Sub-Compact Support Frame (930-0020). Nine rigging
positions are available, allowing vertical inter-cabinet splay angles from 0° to 10°. Always consult Adamson's ArrayIntelligence
software and the CS-Series Line Array Rigging Manual for correct rigging positions and proper rigging instructions.
The CS10 is intended to be used as a standalone system or with other CS-Series products and is designed to pair easily and
coherently with all CS-Series subwoofers.
User Manual
6
Advertisement
Table of Contents
