Related Manuals for Adamson Systems Engineering Metrix Series
Summary of Contents for Adamson Systems Engineering Metrix Series
- Page 3 Contents: Metrix Series Introduction What is in the Metrix? Rigging Options & Adapters p. 6-9 Accessories p. 10 Spec Sheets p.11-16 Metrix standard amp configuration p.17-19 Product Codes p.20 Additional Information p.21 Metrix User Manual Page 3 of 22...
- Page 4 The Adamson Metrix Series is designed for small to medium permanent installations and for use as the main PA system in smaller touring applications. The Metrix Series is a solid solution for large format touring as a front fill, lip fill or as out fill arrays. The ultra compact enclosures feature a 5°...
- Page 5 What is in the Metrix? Metrix-i Metrix-t The ultra compact Metrix enclosure features a 5° vertical pattern by 120° horizontal pattern. The newly designed Adamson ND8-LM 8.5” Kevlar neodymium low-mid frequency driver is optimized for the 2-way enclosure, and is paired with a 1.4”...
- Page 6 Rigging Options & Adapters The new series is available with 2 different rigging systems: Touring (Metrix-t) and Installation (Metrix-i) versions. Metrix-i introduces the EIR™ ‘Enclosed Installation Rigging’ system, which is a semi-permanent lightweight solution, designed for the economically concerned customer. Metrix-t features AIR™-the world’s most convinient rigging system, familiar to many from the SpekTrix Line.
- Page 7 Rigging Options & Adapters The Metrix Install Adapter Plate is available when wanting to fly the Metrix Sub in the same array with the Metrix-i or Metrix W -i enclosures. The Metrix Sub is flyable within the same array or behind the main array when trim heights are limited. The Metrix Frame Link Adapter is available for connecting 2 frames together so that a sub array can be flown behind the main array.
- Page 8 Rigging Options & Adapters The Metrix W-t Polemount Designed for use with one or two 15° W enclosures. The polemount allows 3 different angles for the bottom W enclosure (-5 °, -10 °, -15 °) and can be mounted on top of ground stacked Metrix Subs, or used with a stand.
- Page 9 Rigging Options & Adapters For the Install version of the rigging frame, attach the hanging bracket to the steel frame. Note that there are several positions alongside the middle bar to attain the desired frame angle when flown. In the Touring Version a moveable pick point is built in, therefore no hanging bracket is needed.
- Page 10 Accessories The Metrix Sub Soft Covers The covers are designed to protect the enclosures when in transport or in storage. This Waterproof nylon fabric is durable and has foam lined padding to protect against scratches and bumps. The cover is designed for a pair or Metrix subs stacked on an optional wooden dolly.
-
Page 11: Product Specifications
Metrix double 15” sub woofer, as well as for use as front-, side-, or stage-fill box fin full-sized touring applications. Similar to the high-end SpekTrix True Line Source Array Series, The Metrix Series is designed for use in arrays of six or more elements, each enclosure has a 5 degree vertical x 120 degrees horizontal coverage pattern. -
Page 12: Technical Specifications
Right: AIR™ System standard on the METRIX W-t HF 110 / 220 / 440 Connection Neutrik Speakon NL8 Adamson Systems Engineering 1401 Scugog Line 6, Port Perry, ON L9L 1B2, Canada t: [905] 982 0520 f: [905] 982 0609 www.adamsonsystems.com info@adamsonsystems.com... - Page 13 The result is clear, clean high end, with full and warm mid-range. The Metrix series is an effective and economical choice for smaller installations in venues such as houses of worship, congress centers and for use at corporate gigs; where superior speech reinforcement, medium sound pressure levels, and exceptional clarity are a must.
- Page 14 Right: AIR™ System standard on the METRIX W-t L/MF 250 / 500 / 1000 HF 110 / 220 / 440 Connection Neutrik Speakon NL8 Adamson Systems Engineering 1401 Scugog Line 6, Port Perry, ON L9L 1B2, Canada t: [905] 982 0520 f: [905] 982 0609 www.adamsonsystems.com Specifications are subject to change without notice.
- Page 15 THE AIR™ SYSTEM FLYING HARDWARE Designed to complete the Metrix series , this ultra compact line array cabinet is a convertible cardioid Sub; a single-sided box that can be arrayed conventionally or arrayed in back-to-front pairs for true cardioid performance.
- Page 16 (AES / Program / Peak) 2 x 500 / 1000 / 2000 Connection Neutrik Speakon™ NL8 connectors Processor Presets XTA, PLM, LAKE Adamson Systems Engineering 1401 Scugog Line 6, Port Perry, ON L9L 1B2, Canada t: [905] 982 0520 f: [905] 982 0609 www.adamsonsystems.com Specifications are subject to change without notice.
- Page 17 Amp Configurations Metrix User Manual Page 17 of 22...
- Page 18 Amp Configurations Metrix User Manual Page 18 of 22...
- Page 19 Amp Configurations Metrix User Manual Page 19 of 22...
- Page 20 Part Numbers Part Number METRIX-i 900055 METRIX-t 900044 METRIX W-i 900057 METRIX W-t 900056 METRIX SUB-t 900058 METRIX SUB-i 900059 METRIX ND15-S 911501 METRIX ND8-LM 910803 B&C DE800 860066 EIR™ Plate 883103 (Left or Right) EIR™ Plate Screws (6mm Hex button head) 880088 AIR™...
- Page 21 Additional Info Nominations & Awards Pictured below: Groundstacked, as seen during the official release at the 2007 AES Show in New York, October 5th - 8th 2007. The Metrix Sub received the Pro Audio Review’s PAR Excellence award. Download: A previous Adamson recipient of the award was the SpekTrix W enclosure. http://www.adamsonsystems.com/technical_ support/get_adamson_shooter/index.php The Metrix Enclosure has been nominated for Outstanding Technical Achievement...