Contents Symbols __________________________________________________________________________________ Safety & Warnings __________________________________________________________________________________ Status LED __________________________________________________________________________________ Product Overview __________________________________________________________________________________ Power __________________________________________________________________________________ Connectivity __________________________________________________________________________________ Rack Mounted Systems __________________________________________________________________________________ ArrayIntelligence __________________________________________________________________________________ Technical Specifications __________________________________________________________________________________ Symbols This symbol alerts the user that there are important operating and maintenance instructions in the literature accompanying this appliance This symbol alerts the user to the presence of voltages that can cause dangerous electric shock This symbol alerts the user to the weight of the appliance that can cause muscle strain or back injury...
A qualifi ed technician must be present during the installation and use of this product. This product is capable of producing extremely high sound pressure levels and should be used according to the specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product.
~ 50-60Hz Normal Operation Green Solid Amplifi er Off Amber Solid STATUS CAUTION THRU ADAMSON SYSTEMS ENGINEERING RISK OF ELECTRIC SHOCK Amplifi er Clipping Flashing DO NOT OPEN www.adamsonsystems.com MADE IN CANADA FABRIQUÉ AU CANADA General Fault Solid In an effort to continuously improve its products, Adamson releases updated software, presets and standards for its products.
CS-Series Line Array Rigging Manual for correct rigging positions and proper rigging instructions. The CS10 is intended to be used as a standalone system or with other CS-Series products and is designed to pair easily and coherently with all CS-Series subwoofers.
The input voltage supplied to the AC Input connector will be the same voltage supplied to any additional CS-Series products connected to the CS10’s AC Output connector. The number of loudspeakers that is safe to link in this manner is determined by the supply voltage, the total current draw of all connected loudspeakers on the circuit, the circuit breaker rating, and the rating of the utlizied AC cabling.
Page 8
Current draw for the CS10 is dynamic and fluctuates as operating levels change. The Power Distribution System (PDS, 914-0002 - 110 V/914-0003 - 230 V) provides six individually protected AC circuits of 208/230 V, 16 A. When using the Adamson PDS, you can link a maximum of six CS10 loudspeakers per circuit.
Input 100V - 240V, AES / ANALOG OUTPUT MUST BE GROUNDED / EARTHED 50/60Hz, 1A festival environment. 15 Vdc WARNING ADAMSON SYSTEMS ENGINEERING Serial Sticker Here WORD CLOCK OUT MUST BE GROUNDED www.adamsonsystems.com / EARTHED MADE IN CANADA FABRIQUÉ AU CANADA...
ArrayIntelligence ArrayIntelligence is a single software platform which allows the user to design and deploy a system, all from a single interface. From room design and simulation to connectivity and diagnostics, this unifi ed platform reduces the need for additional software in order to properly deploy and deliver complete audio systems.