Cisco Orderable Accessories - Cisco Catalyst Wireless 9163E Manual

Installing the Access Point
• Ethernet RJ-45 connector and installation tool
• Ground rod, as required by local regulations

Cisco Orderable Accessories

Order the following accessories separately from Cisco:
• AP-mounting brackets to mount the CW9163E AP.
• Accessory kits
• Supported power injectors.
Mounting Brackets Description
AIR-MNT-VERT1= Vertical mount to a wall or 2 to 5 inch (51 to 127 mm) diameter pole
Accessory Kit Description
AIR-ACC-KIT1= This kit contains the following items:
• CAT 5e RJ45 Ethernet port plug and gland assembly (Qty:
5)
• RJ45 port dust caps (Qty: 2)
• Ground lug (Qty: 1)
• DC plug (Qty 1)
AIR-ACC245LA-N= Lightning Arrestor kit
AIR-ACC-CAT6= CAT 6/6A Ethernet connector and cable gland assembly. Qty:
5
Power Source Description
AIR-PWRINJ6= 30 W rated single-port PoE injector
AIR-PWRINJ7= 65 W rated single-port PoE injector (802.3bt), mGig Ethernet
IW-PWRINJ-60RGDMG= 37 W rated power injector
MA-INJ-4 30 W rated single-port PoE injector
Note
MA-INJ-6 60 W rated PoE injector (802.3bt), mGig Ethernet
Cisco Catalyst Wireless 9163E Access Point Hardware Installation and Deployment Guide
This power injector is in End of Life (EoL)
stage.
Cisco Orderable Accessories
13