Table of Contents
Advertisement
7. Move the 10 x objective into
the optical path.
Move the 10x objective into the optical
path by rotating the revolving nosepiece
securely into the clickstop.
8. Adjust the eyepiece diopter.
Turn down the reticle in/out lever to the
right to bring the photomask into the
optical path.
Rotate the diopter adjustment ring on
each eyepiece to bring the photomask's
double crosshairs into sharp focus.
(Be
sure to perform this step for each eye,
as correct focus for each eye is usually
different.)
If the optional rubber eye guards are
used and if you wear glasses, fold
down the rubber eyeguards.
9. Adjust the interpupillary distance.
Adjust the interpupillary distance until
the viewfield is visible as a single image
through both eyepieces.
Figure 2-9
Advertisement
Table of Contents
