Table of Contents
Advertisement
installation
8. Stand the unit. Remove the middle hinge
hole covers and swap their position with the
middle hinge. Reverse the middle hinge.
9. Place the bottom hole of the lower door onto
the bottom hinge pin. Insert the middle hinge
pin into the upper hole of the lower door.
Tighten the pin securely. Screw the middle
hinge tightly. Cover the remaining holes with
the hole covers.
• Ensure the lower door is aligned
horizontally and vertically, so that the
seals are closed on all sides before
finally tightening the pin.
10. Carefully take the wire from the top of the
upper door and thread through the other
side.
11. Place the bottom hole of the upper door onto
the middle hinge pin. Reverse the upper
hinge. Insert the upper hinge pin into the
upper hole of the upper door. Tighten the
pin securely. Screw the upper hinge tightly.
Cover the upper hinge with the upper hinge
cover for left side and thread wire through
the hinge cover. Connect the cable to the
terminal.
• Ensure the upper door is aligned
horizontally and vertically, so that the
seals are closed on all sides before
finally tightening the pin.
10
Advertisement
Table of Contents
