Contents safety warnings ........................4 unpacking ..........................6 installation ........................... 7 location ..........................7 levelling the unit ....................... 7 free space requirements ....................7 installing the door handles ....................7 reversing the door swing ....................8 cleaning before use ......................11 before using your unit .....................11 product overview ......................
safety warnings For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. • Read all instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party, make sure to include this manual.
Page 5
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. • Do not store bottles or glass containers in the freezer compartment. Contents can expand when frozen (fizzy drinks) which may break the bottle and damage your freezer compartment.
Thank you for purchasing your new Kenwood Fridge Freezer. These operating instructions will help you use it properly and safely. We recommend that you spend some time reading this installation/instruction manual in order that you fully understand all the operational features it offers.
installation installation location When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated with an average room temperature of between 10°C and 43°C. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption.
installation reversing the door swing tools required: Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner • Ensure the unit is unplugged and empty. • To take the door off it is necessary to tilt the unit backwards. You should rest the unit on something solid, e.g.
Page 9
installation Remove the screw and stop block from the bottom of the upper door and move it to the opposite side. Remove also the door stopper and keep it for future use. For the opposite side, use the door stopper for left side. Screw tightly. Door stopper has left and right side.
Page 10
installation 6. On the bottom hinge, move the position of the bottom hinge pin to the other hole. Tighten the pin securely. 7. Screw the levelling feet fix board, bottom hinge and levelling feet tightly on their new position. 8. Stand the unit. Remove the middle hinge hole covers and swap their position with the middle hinge.
installation 10. Place the bottom hole of the upper door onto the middle hinge pin. Reverse the upper hinge and pin position. Insert the upper hinge pin into the upper hole of the upper door. Tighten the pin securely. Screw the upper hinge tightly. • Ensure the upper door is aligned horizontally and vertically, so that the seals are closed on all sides before finally tightening the pin.
product overview main unit Control Panel LED Light Fridge Door Fridge Glass Shelf Shelf Bin Cover Shelf Salad Bin Freezer Drawer Bottle Stopper Wine Rack Egg Tray Ice Tray (recommend to hang on the lower fridge door shelf)
operation switching on your unit 1. Connect the mains cable to the mains socket. Press and hold to turn the unit on or off, a sound will be heard. The internal temperature of your unit is controlled by an electronic control panel.
noises inside the unit! You may notice that your unit makes some unusual noises. Most of these are perfectly normal, but you should be aware of them! These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has become more pronounced since the introduction of CFC free gases.
defrosting frozen food 1. Take the frozen food out from the freezer compartment and uncover the frozen food. Let it defrost at room temperature. Don’t forget that defrosting in a warm area encourages the growth of bacteria and low temperature cooking may not destroy dangerous bacteria. 2.
cleaning the interior and the exterior of the unit • Remove all the shelves and drawers. • Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm water using a sponge or cloth. Wipe completely dry before replacing the shelves, drawers and bin(s).
maintenance changing the internal LED light The internal light is an LED panel that cannot be changed by the user. Please contact a qualified service agent. care when handling / moving your unit Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted by holding the edges of the top surface.
Features and specifications are subject to change without prior notice. product fiche Brand Kenwood Model KNF60X18 Household Appliance Category Energy Efficiency Class Energy consumption per year, based on standard test results for 24 hours. Actual energy consumption will depend on...
Page 20
DSG Retail Ltd. (co. no. 504877) 1 Portal Way, London, W3 6RS, UK Manufactured for DSG Retail Limited under Licence from Fisher & Paykel Appliances Italy SpA. DSG Retail Limited is responsible for after sales service. IB-KNF60X18-180903V2...