Bosch DICENTIS Installation Manual page 44

44 en | Installation material and tools
Pin #
1
2
3
4
5
6
7
8
Table 5.7: Connector pinout
Note: the female plug to be used with the 8-pin connector is supplied pre-assembled with the
product. You will need to make the wire connections, which only require simple push-in action
to lock.
Wiring
The connection to the Phoenix connector has to be made using ferrules.
The tables below give more details on the connection.
Conductor cross section max.
(solid and flexible)
Conductor cross section flexible,
with ferrule without plastic sleeve
max.
Conductor cross section flexible,
with ferrule with plastic sleeve
max.
Table 5.8: Connection data
Ferrules without insulating collar
(according to DIN 46228-1)
Table 5.9: Specifications for ferrules
2023-02 (draft) | 4.3-draft |
Function
Switch to set the 50 V/1 A potential free
booth on-air LED on/ contact
off Galvanic separated
Input for an external inactive: < 1 VDC
telephone system active: > 3 VDC
ringing indicator max.: 24 VDC
Galvanic separated
Input for an external inactive: < 1 VDC
system for warning active: > 3 VDC
indicator max.: 24 VDC
Galvanic separated
1.5 mm
1.5 mm
0.75 mm
Cross section: 0.22 mm
Length: 5 mm to 10 mm
Installation manual
Specifications
2
2
2
2
to 1.5 mm
DICENTIS
Description
OUTPUT
OUTPUT
INPUT Negative ( - )
INPUT Positive ( + )
INPUT Negative ( - )
INPUT Positive ( + )
2
Bosch Security Systems B.V.