Bosch DICENTIS Installation Manual page 11

DICENTIS
7. Multimedia device:
–
8. Powering switch:
–
9. Audio processor and powering switch:
–
10. System Network Cable:
–
11. Multimedia device:
–
12. Transmitter OMNEO:
–
13. Flush base device:
–
14. Interpreter Desk:
–
15. Flush language selector:
–
16. IR distribution:
–
A typical camera setup in a DICENTIS Conference System consists of:
Bosch Security Systems B.V.
Only one DICENTIS device should be connected here.
Used to increase the number of DICENTIS devices connected to the system.
Controls the system audio, routes audio from and to the system and supplies power
to the DICENTIS devices.
Connects DICENTIS devices, the Audio processor and powering switch, and one or
more Powering switches to each other.
This device is used for "system power on/off". It is always connected to the powered
socket of the Audio processor and powering switch or Powering switch.
Note: Only one DICENTIS Multimedia device should be connected here.
This device allows for wireless language distribution.
This device is intended for use in flush-mounted solutions, adding a number of
functions.
Provides extensive facilities for professional interpretation for the DICENTIS
Conference System.
Note: A maximum of 10 desks can be installed per booth.
This device allows the participants to easily choose their preferred language.
Through infrared distribution, the signals from the INT-TXO are transmitted to the
radiators in the room.
Installation manual
System installation overview | en
2023-02 (draft) | 4.3-draft |
11