Table of Contents
Advertisement
Quick Links
GMTE232C
BATTERY POWERED CRIMP TOOL
Description
The GMTE232C Battery Powered Crimp Tool is a hand
held, self-contained crimp tool equivalent to the DMC
GMT232 (M22520/37-01) hand crimp tool.
Safety
Safety is essential in the use and maintenance of DMC
tools and equipment. This manual and any markings on
the tool provide information for avoiding hazards and
unsafe practices related to the use of this tool. Observe
all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following DMC tool:
GMTE232C Battery Powered Crimp Tool
Keep this manual available to all personnel. Replacement
manuals are available upon request at no charge.
__________________________________________________________________________________________
GMTE232C-DS
©2022
Daniels Manufacturing Corporation
526 Thorpe Road, Orlando, FL 32824 USA
Phone: 407-855-6161 Fax: 407-855-6884 Email: DMC@dmctools.com
All specifications are nominal and may change as
design improvements occur.
liable for damages resulting from misapplication
or misuse of its products.
KEEP THIS MANUAL
Page 1 of 8
DATASHEET
DMC shall not be
REV. A
8/30/2022
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DMC GMTE232C
Summary of Contents for DMC GMTE232C
- Page 1 All specifications are nominal and may change as design improvements occur. DMC shall not be The GMTE232C Battery Powered Crimp Tool is a hand liable for damages resulting from misapplication held, self-contained crimp tool equivalent to the DMC or misuse of its products.
- Page 2 GMTE232C BATTERY POWERED CRIMP TOOL DATASHEET Important Safety Information Important Safety Information __________________________________________________________________________________________ GMTE232C-DS ©2022 Page 2 of 8 REV. A 8/30/2022 Daniels Manufacturing Corporation 526 Thorpe Road, Orlando, FL 32824 USA Phone: 407-855-6161 Fax: 407-855-6884 Email: DMC@dmctools.com...
-
Page 3: Important Safety Information
Avg. Crimps per Charge=Approx. 150 Battery Charging Voltage=18VDC Charging Time=22 minutes US Pat. No. 7,254,982 __________________________________________________________________________________________ GMTE232C-DS ©2022 Page 3 of 8 REV. A 8/30/2022 Daniels Manufacturing Corporation 526 Thorpe Road, Orlando, FL 32824 USA Phone: 407-855-6161 Fax: 407-855-6884 Email: DMC@dmctools.com... -
Page 4: Operation
If the tool is unable to reach the required crimp Annually or after 10,000 Crimps force, the red LED, work light, and an audible 1. Return the tool to the DMC repair center for beep will pulse until after the trigger is released. inspection & calibration. - Page 5 DO NOT throw old batteries into a fire, or dispose of as domestic waste. __________________________________________________________________________________________ GMTE232C-DS ©2022 Page 5 of 8 REV. A 8/30/2022 Daniels Manufacturing Corporation 526 Thorpe Road, Orlando, FL 32824 USA Phone: 407-855-6161 Fax: 407-855-6884 Email: DMC@dmctools.com...
-
Page 6: Bluetooth Connectivity
If flashing display the last service date, the last five pressure continues, return the unit to DMC for repair. Continuous values, the device temperature or the number of illumination indicates that a conditioning charge is crimps you can still make with the connected tool. - Page 7 6. Press the right button will allow you to go back to the b. Pressing and holding both button lets you previous screen. __________________________________________________________________________________________ GMTE232C-DS ©2022 Page 7 of 8 REV. A 8/30/2022 Daniels Manufacturing Corporation 526 Thorpe Road, Orlando, FL 32824 USA Phone: 407-855-6161 Fax: 407-855-6884 Email: DMC@dmctools.com...
-
Page 8: Error Codes
DMC products are not consumer products. This warranty shall not cover any damage to any product which, in the opinion of DMC, was caused by normal wear, misuse, improper operation, tampering, __________________________________________________________________________________________ GMTE232C-DS ©2022...
Need help?
Do you have a question about the GMTE232C and is the answer not in the manual?
Questions and answers