Adding And Configuring Additional Radios - ProSoft Technology RadioLinx RLXIB-IHW-66 Setup Manual

Adding and Configuring Additional Radios

Setup Guide
9 Adding and Configuring Additional Radios
At this point you should attach and configure any additional IHW-66 radios you
will be using. Ensure that any new radios use a unique name, but the same
Network SSID as your master. The only difference in procedure will be in setting
up each additional radio. Instead of setting your additional radios as Masters,
they should be set as Repeaters or, more rarely, Clients, depending on their
intended purpose.
ProSoft Technology, Inc.
May 18, 2009
RLXIB-IHW-66 ♦ 802.11a,b,g
Industrial Hotspot
Page 17 of 20