Crestron C2N-TFM Operation Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Tuner
  5. C2N-TFM
  6. Operation manual
Crestron C2N-TFM Operation Manual

Crestron C2N-TFM Operation Manual

Fm radio tuner
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Crestron C2N-TFM
FM Radio Tuner
Operations Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C2N-TFM and is the answer not in the manual?

Questions and answers

Related Manuals for Crestron C2N-TFM

Summary of Contents for Crestron C2N-TFM

  • Page 1 Crestron C2N-TFM FM Radio Tuner Operations Guide...
  • Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names, and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.

  • Page 3: Table Of Contents

    Crestron C2N-TFM Contents FM Radio Tuner: C2N-TFM Introduction ... 1 Features and Functions... 1 Specifications ... 2 Physical Description... 3 Industry Compliance ... 7 Setup ... 8 Network Wiring... 8 Identity Code ... 9 Hardware Hookup ... 12 FM Tuner Example Program ... 12 Preparation ...

  • Page 5: Fm Radio Tuner: C2N-Tfm

    12.) Functional Summary Operations Guide - DOC. 6233A ® C2N-TFM is a Crestron-controlled FM Radio tuner (FM Tuner) • Headphone connector for local monitoring of audio output • Up to twenty presets for fast program selection •...

  • Page 6: Specifications

    The FM Tuner incorporates automatic as well as manual selection of mute and mono mode functions. Specifications The following table summarizes the specifications for the C2N-TFM tuner. Specifications of the C2N-TFM (continued on next page) 2 • FM Radio Tuner: C2N-TFM •...

  • Page 7: Physical Description

    FTP site). Physical Description The C2N-TFM is housed in a black enclosure with labeling on the front and rear panels. The front of the unit includes ten LEDs that indicate the unit’s status, and all local controls. All connections, except for headphones, are made on the back of the unit.
  • Page 8 FM Radio Tuner C2N-TFM Overall Dimensions 4 • FM Radio Tuner: C2N-TFM 7.07 in (17.96 cm) F M T U N E R SCAN TUNE CRESTRON AM RADIO AUDIO OUT SETUP 24 Y Z G CRESTRON E L E C T R O N I C S I N C . , R O C K L E I G H , N J 0 7 6 4 7 6.94 in...
  • Page 9 Refer to the illustrations and descriptions, which follow. C2N-TFM Ports This 4-pin mini-terminal block connector is used to connect the C2N-TFM module to the Cresnet system. Data and power for the C2N-TFM are provided via the connection. Refer to “Network Wiring” on page 8. AM RADIO (RJ-45) The RJ-45 AM RADIO port provides CAT5 interface (up to 500 feet) to the companion Crestron C2N-TAMWX AM/Weather Tuner.

  • Page 10: Front Panel Controls And Indicators

    Front Panel Controls and Indicators Ten LED indicators, a five-digit display, and three pushbutton switches are located on the front panel of the C2N-TFM. Refer to the illustration and descriptions that follow. C2N-TFM Front Panel Controls and Indicators PWR (Power) This green LED illuminates when power is supplied to the C2N-TFM.

  • Page 11: Save Button

    Refer to “Method B (Touch Settable IDs)” on page 10 for detailed information. Industry Compliance As of the date of manufacture, the C2N-TFM has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.

  • Page 12: Setup

    Avoid tinning too far up the wires or the end becomes brittle. Insert the tinned connection into the Cresnet connector and tighten the retaining screw. Repeat the procedure for the other three conductors. 8 • FM Radio Tuner: C2N-TFM 40,000 Where: R = Resistance (refer to table below).

  • Page 13: Identity Code

    SIMPL Windows procedure. Refer to the note on page 33 for The Net ID of the C2N-TFM has been factory set to 56. The Net IDs of multiple a definition of Viewport. C2N-TFMs in the same system must be unique. Net IDs are changed from a personal computer (PC) via the Crestron Viewport.
  • Page 14 10 • FM Radio Tuner: C2N-TFM In the "Set Network ID" window, click Close. 10. Repeat this procedure for each C2N-TFM to be added to the system. 1. Ensure that all C2N-TFMs are connected to the control system. 2. Open the Crestron Viewport version 3.35 or later.
  • Page 15 TSID Conversion Tool. The “Serial Number Tool” window is displayed. (Refer to the following figure.) Enter the serial number or TSID number as instructed; press the appropriate button to obtain the corresponding number. FM Radio Tuner TSID Conversion FM Radio Tuner: C2N-TFM • 11...

  • Page 16: Hardware Hookup

    FM Tuner plus the AM/WX Tuner. (The TV audio and video portion of this configuration applys only to the Crestron television and FM radio tuner, C2N-TTVFM.) Cresnet System Hookup Connections for C2N-TFM Typical Configuration Diagram for C2N-TFM FM Tuner Example Program The example program for the FM Tuner demonstrates the various features of the unit.

  • Page 17: Preparation

    (search for C2N-TFM.Basic Example.zip), use the instructions given in “Upload via Crestron Viewport” on page 36, to load the .spz program to the control system and the .vtz program to the touchpanel. FM Radio Tuner FM Radio Tuner: C2N-TFM • 13...
  • Page 18 Tuning/Search Functions The example program enables several types of station selection operations. 14 • FM Radio Tuner: C2N-TFM • You can enter a specific station number using the keypad in the bottom section of the screen. Select the station number and press ent to enter the selection.

  • Page 19: Programming Software

    Tune buttons. ™ creates a complete project, with no special programming FM Radio Tuner  -based programming software. The ® Pro-e (VT Pro-e) software packages). FM Radio Tuner: C2N-TFM • 15...

  • Page 20: Earliest Version Software Requirements For The Pc

    Programming with SIMPL Windows NOTE: The following are acceptable file extensions for programs that include a C2N-TFM, developed for specific control system types: SIMPL Windows is Crestron's software for programming Crestron control systems. It provides a well-designed graphical environment with a number of workspaces (i.e., windows) in which a programmer can select, configure, program, test, and...

  • Page 21: C2Net Device Slot In Configuration Manager

    Tuner, simply ignore the AM Tuner Controls inputs and outputs in your program. NOTE: The first C2N-TFM in a system is preset with a Net ID of 56 when its symbol is dragged into the upper pane of System Views. Additional units are assigned different Net ID numbers as they are added.

  • Page 22: Setting The Net Id In Device Settings

    Double-click the C2N-TFM icon to open the “Device Settings” window. This window displays the C2N-TFM device information. If necessary, select the Net ID tab to change the C2N-TFM Net ID, as shown in the following figure. C2N-TFM “Device Settings” Window...
  • Page 23 Crestron C2N-TFM C2N-TFM Sub-Slot 01: FM Tuner Controls Digital Input and Output Signals C2N-TFM Digital Input and Output Signal Descriptions (continued on next page) Operations Guide - DOC. 6233A SIGNAL TYPE AND NAME DESCRIPTION Input: Mute toggle. <FM_MuteAll> Mutes the speaker and headphone audio for as long as the input is high.
  • Page 24 <FM_Hphone_Vol-> Users can control the headphone volume by pressing the local up (k) and down (j) buttons on the C2N-TFM when the unit is in VOL mode, or from remote buttons defined on a touchpanel or other interface. If the input is high for longer than 300...
  • Page 25 <FM_Station-> Users can tune to stations by pressing the local up (k) and down (j) buttons on the C2N-TFM when the unit is in TUNE mode; or from remote buttons defined on a touchpanel or other interface.
  • Page 26 <FM_Save_Preset> <FM Presets> analog. Users can save a preset by pressing the local Save button on the C2N-TFM when the tuner is in PRE mode; or from remote buttons defined on a touchpanel or other interface. High/1 (rising edge) = Save preset; Low/0 = No effect Input: <FM_Mono>...
  • Page 27 Crestron C2N-TFM C2N-TFM Sub-Slot 01: FM Tuner Controls Analog Input and Output Signals C2N-TFM FM Tuner Controls Analog Input and Output Signal Descriptions (continued on next page) Operations Guide - DOC. 6233A SIGNAL TYPE AND NAME DESCRIPTION Input: Sets the headphone volume level from 0% to <FM_Hphone_Volume>...
  • Page 28 FM Radio Tuner C2N-TFM FM Tuner Controls Analog Input and Output Signal Descriptions (continued) C2N-TFM Slot 02, FM Tuner RDS Information Input and Output Signals 24 • FM Radio Tuner: C2N-TFM SIGNAL TYPE AND NAME DESCRIPTION Selects a station preset to Play or Save.
  • Page 29 Crestron C2N-TFM C2N-TFM FM Tuner RDS Information Input and Output Signal Descriptions (continued on next page) Operations Guide - DOC. 6233A SIGNAL TYPE AND NAME DESCRIPTION Analog input: Each FM RDS/RBDS report code can be enabled <EventFlags> or disabled by setting the individual bits to high (enable) or low (disable).
  • Page 30 FM Radio Tuner C2N-TFM FM Tuner RDS Information Input and Output Signal Descriptions (continued) (continued on next page) 26 • FM Radio Tuner: C2N-TFM SIGNAL TYPE AND NAME DESCRIPTION Analog input: Selects a traffic report station to search. <TuneByTraffic> Valid analog values are as follows:...
  • Page 31 Crestron C2N-TFM C2N-TFM FM Tuner RDS Information Input and Output Signal Descriptions (continued) Operations Guide - DOC. 6233A SIGNAL TYPE AND NAME DESCRIPTION Reports the UTC month of the year. The analog Analog output: <UTC_Month> value will range from 1d (for January) to 12d (for December).
  • Page 32 FM Radio Tuner C2N-TFM Slot 03, AM Tuner Controls Digital Input and Output Signals C2N-TFM AM Tuner Controls Digital Input and Output Signal Descriptions (continued on next page) 28 • FM Radio Tuner: C2N-TFM SIGNAL TYPE AND NAME DESCRIPTION Output: <AM_Mute-F>...
  • Page 33 Crestron C2N-TFM C2N-TFM AM Tuner Controls Digital Input and Output Signal Descriptions (continued) (continued on next page) Operations Guide - DOC. 6233A SIGNAL TYPE AND NAME DESCRIPTION Indicates the state of the WX LED on the C2N- Output: <WX_LED-F> TAMWX. This LED is active when the C2N- TAMWX is set to the weather band.
  • Page 34 FM Radio Tuner C2N-TFM AM Tuner Controls Digital Input and Output Signal Descriptions (continued) (continued on next page) 30 • FM Radio Tuner: C2N-TFM SIGNAL TYPE AND NAME DESCRIPTION Sets the C2N-TAMWX to the AM band for as long Input: <AM_BandSelect>...
  • Page 35 Crestron C2N-TFM C2N-TFM AM Tuner Controls Digital Input and Output Signal Descriptions (continued) Operations Guide - DOC. 6233A SIGNAL TYPE AND NAME DESCRIPTION Tunes the AM or weather station up (+) or down Inputs: <AM_Station+>, (-), for as long as the input is high.
  • Page 36 FM Radio Tuner C2N-TFM Slot 03, AM Tuner Controls Analog Input and Output Signals C2N-TFM AM Tuner Controls Analog Input and Output Signal Descriptions (continued on next page) 32 • FM Radio Tuner: C2N-TFM SIGNAL NAME DESCRIPTION Input: <AM_Hphone_Vol> Sets the headphone volume level from 0% to 100%.

  • Page 37: Uploading And Upgrading

    Crestron C2N-TFM C2N-TFM AM Tuner Controls Analog Input and Output Signal Descriptions (continued) Uploading and Upgrading Assuming a PC is properly connected to the entire system, Crestron programming software allows the programmer to upload programs and projects after their development to the system and network devices. However, there are times when the files for the program and projects are compiled and not uploaded.

  • Page 38: Communication Settings

    Crestron Viewport may be preferred over development tools when uploading programs and projects. The following sections define how one would upload a SIMPL Windows program or upgrade the firmware of the C2N-TFM. However, before attempting to upload or upgrade, it is necessary to establish communications. Communication Settings NOTE: For laptops and other PCs without a built-in RS-232 port, Crestron recommends the use of PCMCIA cards, rather than USB-to-serial adapters.
  • Page 39 (COM 1 is shown after this step) is selected, and that all communication parameters and necessary options from the “Port Settings” window are selected as shown below. Click the OK button to save the settings and close the window. FM Radio Tuner FM Radio Tuner: C2N-TFM • 35...

  • Page 40: Uploading A Simpl Windows Program

    NOTE: Refer to the respective Operations Guide for the control system for details about the other fields shown on the “Send Program” window. 36 • FM Radio Tuner: C2N-TFM 4. To verify communication, select Diagnostics | Establish Communications (Find Rack). This should display a window that gives the COM port and baud rate.

  • Page 41: Firmware Upgrade - Fm Tuner

    Crestron C2N-TFM “Send Program” Window Firmware Upgrade – FM Tuner To take advantage of all the C2N-TFM features, it is important that the unit contains A firmware upgrade file has the extension .upg. the latest firmware available. Therefore, please check the Crestron website (http://www.crestron.com/downloads/software_updates.asp) for the latest version of...

  • Page 42: Firmware Upgrade - Amwx Tuner

    Cresnet device, but is a sub-slot device of the FM Tuner. To upgrade the firmware, complete the following steps. 38 • FM Radio Tuner: C2N-TFM 3. As shown after this step, select the Net ID of the C2N-TFM and then click OK. The “Open” window appears (refer to the subsequent graphic).
  • Page 43 “Open” Window Operations Guide - DOC. 6233A 3. As shown after this step, select the Net ID of the C2N-TFM (56), select the desired sub-slot ID of the AM/WX Tuner (03), and then click OK. The “Open” window appears (refer to the subsequent graphic).

  • Page 44: Problem Solving

    Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the C2N-TFM, additional information and programming examples may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision.

  • Page 45: Appendix: Rds/Rbds Function Support

    CODE (EUROPE) No program type or undefined News Current Affair Information Sports Education Drama FM Radio Tuner DESCRIPTION RBDS PROGRAM TYPE (US) No program type or undefined News Information Sports Talk Rock Classic Rock FM Radio Tuner: C2N-TFM • 41...
  • Page 46 FM Radio Tuner RDS/RBDS Command Table (continued) CODE 42 • FM Radio Tuner: C2N-TFM RDS PROGRAM TYPE (EUROPE) Culture Science Varied Pop Music Rock Music M.O.R Music Light classical Serious Classic Other Music Weather Finance Children’s Program Social Affairs Religion...

  • Page 47: Return And Warranty Policies

    All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation. Operations Guide - DOC. 6233A FM Radio Tuner FM Radio Tuner: C2N-TFM • 43...
  • Page 48 Crestron Electronics, Inc. Operations Guide – DOC. 6233A 15 Volvo Drive Rockleigh, NJ 07647 07.04 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

Table of Contents

Save PDF