Advertisement
i i
porsche
es A i
to e a t
AUDIO/
VIDEO
AUDIO/VIDEO
AERIAL IN
# Connection to a stereo amplifier
You.can.obtain.a.dynamic.sound output through
your Hi-Fi system when you playback a tape
recorded in Hi-Fi stereo on this VTR.
Connect the
VTR to a stereo amplifier using an audio cable.
TV
o
o
AERIAL
INPUT
~ Satellite receiver
Note
The stereo amplifier must have the audio input capability.
AERIAL
OUTPUT
AERIAL
To-watch a picture from the VTR using this
connection, insert a cassette and press the PLAY
» -button.on
the remote controller or.front panel. of
the VTR.
Note
You must use this
° To watch a picture from the VTR using this.
connection;-insert a-cassette and'press the PLAY
button-on the remote controller or front panel of
the VTR. *
ane
Ee
To watch or record a programme from the'
connected satellite receiver, press the INPUT
SELECT button so that "SA" indicator appear in
the VTR display. (See page 26.)
Note.
If your satellite receiver does not have a SCART socket,
it can be connected using RF fead between aerial and the
VTR. Set a spare channel on the VTR for the satellite
output. (See page 13.)
AERIAL
INPUT
RF.OUT & .
RF INS
Satellite
receiver
* Connect another VTR or a camcorder to the LINE IN 2
(AUDIO, VIDEO) jacks on this VTR.
¢ When you watch or record a picture from the connected
equipment, press the INPUT SELECT button so that "L2"
appear in the VTR display. (See page 36.)
.
* Ifthe connected equipment is monaural (has one audio
output jack), connect to the L/MONO side of the AUDIO
.jacks on this VTR.
d for stereo playback on the TV.
. Satellite
|
antenna
@ Connection to other VTR or external equipment using
the. LINE.IN 2 AUDIO/VIDEO jacks (phono type)
VIDEO QUT
10
PREPAR
:
Advertisement
