Advertisement
eee
cae
Sree
ee eee
21
: About This Function
'Index | Search :
ee
ia
~ Skip Search
INDEX SEARCH
You can easily locate the desired programme using the index signal registered on the tape.
The VTR plays back each programme with an index
;
The VTR finds and plays back a programme with an
_ signal for about 5 seconds.
index signal you specified.
Skip Search
To use this function, index signals have to be registered on your tape. For registering index signals, follow the
procedure below.
@ Registering index signals automatically
,
@ Registering index signals manually
An index signal is automatically registered when
Index signals can be manually registered at
a recording starts.
desired points on the tape during recording.
Press the INDEX (+) button at a desired point.
Notes
¢ An index signal is not registered when the VTR is in
the recording pause mode and recording restarts.
* An index signal is also registered when.a timer
:
programme recording starts.
sr ae:
INDEX
MARK
Note
When registering two or more index signals, certain
intervals are required: more than 1 minute in the SP
tape speed and more than 2 minutes in the LP tape
speed.
Advertisement
