Aiphone JV-1MD Operation Manual page 21

3
Remove the nameplate cover [D].
ATTENTION
 Do not put a sticker over the nameplate cover. Otherwise the LED illumination for the nighttime is decreased.
 Do not remove the packing. If the packing is not installed properly, water may enter the nameplate cover.
4
Gently wipe the inside of the nameplate cover using a soft, dry cloth.
For tough stains, use a lightly damp cloth and neutral detergent diluted in water.
5
Insert the nameplate.
6
Install the front panel in the opposite order of removal.
-21-